5.5-inch color touch screen
Android OS with Cube-a on board
Automatic Prism Centering
On this page:
R120 is a Robotic Android Total Station that provides exceptional precision with an angular accuracy of 1″ (2″ available) and an electronic distance measurement (EDM) accuracy of 1 mm + 1 ppm. It operates effectively up to 1000 m (800 m for 2” version) in reflectorless mode and features a rotation speed of 60° per second. This instrument combines the capabilities of a robotic station with excellent cost-effectiveness.
The R120 is designed with a 5.5-inch color touch screen and runs on the Android operating system, making it user-friendly and similar in interface to a smartphone, which enhances data exchange capabilities. The onboard Cube-a software allows operators to seamlessly integrate GNSS tasks with surveys performed using the total station. Communication and data transfer between the station and the controller are facilitated via a Bluetooth connection.Additionally, the R120 has an integrated modem, enabling the operator to connect to the internet and send and receive topographic data.
Cube-a
The R120 is equipped with the Android operating system and comes pre-installed with the powerful Cube-a program. This onboard software allows operators to easily integrate data from GNSS and surveys conducted with the total station. Communication and data exchange between the station and the controller (GNSS) is made simple with a Bluetooth connection. This means that with the total station, surveys carried out with GNSS, can be loaded through an external controller via Bluetooth. These surveys then can be completed within the total station. With Cube-a, users can navigate the program easily and efficiently, accessing all the classic functions of a total station while enjoying the added benefits of the Android operating system. This integration allows for seamless and streamlined workflows, saving time and effort while achieving the highest level of accuracy.
APC | Automatic Prism Centering
The R120 total station is designed with Automatic Prism Centering (APC) technology that precisely aims and centers the prism up to 1000 meters away. This allows for highly accurate distance measurements without the need for manual prism centering. The APC analyzes the received signal and can be configured by the user to automatically re-lock the prism if lost.
DC SERVO MOTOR
The R120 Robotic Total Station boasts maximum rotation speed of 60 degrees per second, ensuring accurate and controlled rotation. It can switch between Face 1 and Face 2 in just 2.9 seconds, enabling efficient and rapid measurements.
HIGH MEMORY CAPACITY
R120 has 4GB of RAM and 64GB of internal storage, providing a good balance of memory for multitasking and storing files.
LTE MODEM
R120 can fully utilize its SIM card port and integrated modem. The operator can connect to the internet to send and receive topographic data
ANDROID AND CUBE-A ON BOARD
The Android System multiplies the possibilities for operators who can have touch management of jobs and work with convenient background maps. Thanks to this operating system, it is possible to use the total station in a simple and intuitive way, as if it were a smartphone.
OnePole Solution
The OnePole Solution is a surveying system that combines the high accuracy of prism measurements with the ability to measure points that are not visible from the Total Station (TS) using GNSS technology. While a TS requires reference points that must be visible from the station, an RTK GPS receiver can quickly determine its position with centimeter-level accuracy using data from satellites. The OnePole Solution allows for the simultaneous use of TS and GNSS and can easily switch between the two with a simple tap on a button. Additionally, the system reduces prism search times through auto-aiming to the current GNSS position.
FAQ
R180 is available in three versions:
– 0.5” accuracy – 1000 m. as maximum reflectorless range
– 1” accuracy – 1000 m. as maximum reflectorless range
– 2” accuracy – 800 m. as maximum reflectorless range
Yes, thanks to Android operative system the user can configure the Total Station interface respects his needs. It’s possible to change language, change font dimensions, change the screen illumination, connect the instrument to the Wi-Fi, set a password…
R180 can be used in three different configurations:
– Onboard configuration -> to work directly on the station with Cube-a on-board version.
– Remote configuration -> to manage the survey and the station from cube-a installed on a tablet.
– One Pole solution -> for mixed survey, using Cube-a to manage GNSS and TS at the same time.
Yes, after enabling the lock mode the user can lock the prism simply tapping on it from the camera view.
Yes, in Cube-a the user can configure the behavior of the TS after prism lost defining a series of operations to re-lock the prism automatically. The sequence of these actions is completely customizable respects user needs and survey conditions.
The user can use physical methods (cables, USB Key) or wireless method (BT, Wi-Fi, email, cloud) to transfer data from the device to the PC.
- Related products
