Android App
Works via Bluetooth
Works with Stonex GNSS
On this page:
The Cube-connector is an Android application designed to link Android devices with Stonex GNSS receivers. To establish a connection with the GNSS, the Android device must be paired with the receiver via Bluetooth.
Once this Bluetooth connection is established, Cube-Connector will substitute the internal device’s GNSS readings with those from the Stonex GNSS receiver.
Users can effortlessly utilize their GIS/survey software on the Android operating system through Cube-Connector. The application manages all settings and configurations using integrated precision GNSS, making accurate coordinates available for third-party applications.
USER FRIENDLY SOFTWARE
This is Android APP and it has been developed to connect Android devices to Stonex GPS receivers.
For Android devices
Bluetooth connection
Once the Bluetooth connection has been established, Cube-connector will replace the GPS readings from the internal device with the ones from the Stonex GPS receiver
MANAGING DATA
PROJECT MANAGEMENT
• Job management
• Survey Point Library
• System settings (units, precision, parameters, etc.)
• Import/export ASCII and DXF
• Import/export ESRI shapefiles (with attributes)
• Export Google Earth KML/Send to Google Earth
• Import Raster Image
• Share files by cloud services, e-mail, Bluetooth, Wi-Fi
• Customizable ref. systems also by remote RTCM messages
• Features codes (multiple feature tables)
• Fast Coding Panel
• Define GIS features
• Define GIS attributes
• All brand bluetooth disto support
GNSS MANAGEMENT
• Support for Stonex receivers
• Generic NMEA (support for third party receivers) – Rover only
• Receiver status (quality, position, sky view, satellites list, base info)
• Full support for features like E-Bubble, Tilt, Atlas, SureFix
• Network connections management
• Support of RTCM 2.x, RTCM 3.x, CMR, CMR+
• Automatic GNSS model & features detection
• Automatic antenna offset management
• Bluetooth and Wi-Fi GNSS connection
TS MANAGEMENT
• TS Bluetooth
• TS Long Range Bluetooth
• Search and prism tracking (Robotic only)
• Compensator interface
• Station on point
• Free station / Least squares resection
• TS orientation st.dev. and check orientation
• Topographic basic calculation
• Rotate to GPS position3
• Rotate to given point
• Export TS raw data
• Export mixed GPS+TS raw data
• Grid Scan
FAQ
The solution STX-DIG (2D module) determine the direction/heading using two passive antennas set on the cabin roof. The passive antennas are connected with a dual Antenna GNSS Receiver integrated into the Android Tablet. The tablet provide just the heading when it is used in 2D and stand-alone way (without the use of any correction). Without any correction (Ntrip or Base) the GPS sensors will be use only like a compass heading. In this way it is possible to know the Excavator Rotation with a precision of 0.2°
In 1D or 2D module, when the excavator is moved, the operator use the laser receiver installed on the stick to the laser reference plan when he moves the excavator.
The 2D ½ module use the NTRIP signal to get elevation through the GPS antenna. In this way the operator does not need any Laser Receiver on Excavator Stick and Laser Level.
- Related products
